RacerWorld.com Home Page RacerWorld.com Home Page Race Results - Race Tracks and more Racing Community Sell Your Items Fast search
Advanced Search
Listed In Category: JR Motorsports

Remflex 3 1/2” Collector Gaskets-3 Bolt Pattern REM 8003

Seller Username Karl Performance
Manufacturer REM
Part Number 8003
Item Location Iowa
Price $17.99
Time Left Closed
Listing Site

or Get More Information

Remflex 3 1/2” Collector Gaskets-3 Bolt Pattern

  • 3 Bolt Holes
  • 3-25/32" Bolt Hole Spacing
  • 2/Set collector flange gasket
INSTALLATION TIPS:  We want you to get the most from your new Remflex exhaust gaskets.  To assure your complete satisfaction, please follow these basic installation guidelines:
1.)  DO NOT BEND!  Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.  If you bend them, they will break!
2.)  Do not over tighten.  When properly installed the flange should be tightened evenly - See the suggested torque range.
3.)  Longer bolts aren't necessary.  Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.)  Do not use sealers.  Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
5.)  Trim to fit.  Excess material around the flange and/or port mouth can be trimmed with a sharp utility knife or razor blade.



Search | Buy | Sell | MyCommunity | Race Info | Add Site
Copyright © 2022 RacerWorld.com | Privacy
eBay and the eBay Logo are trademarks of eBay Inc